|
1、招标条件
|
|
项目概况： (略) (略) 类6代柔性显示屏生产线项目
|
|
资金到位或资金来源落实情况：资金已落实
|
|
(略) 条件的说明：具备招标条件
|
|
2、招标内容：
|
|
招标项目编号： *** ROYOLE01/19-23
|
|
招标项目名称： (略) (略) 类6代柔性显示屏生产线项目
|
|
项目实施地点：中国 (略) 省
|
|
招标产品列表(主要设备)：
|
|
序号
|
产品名称
|
数量
|
简要技术规格
|
|
*** ROYOLE01/19
|
聚焦粒子束测试仪
|
1台
|
设备用途及基本要求： 本设备功能是特定点的微小样品横截面观察，Defect层别判断。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选 (略) 元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑， (略) 稳定可靠，售后服务优良。
|
|
*** ROYOLE01/20
|
扫描电子显微镜
|
1台
|
设备用途及基本要求： 本设备用于样品观察。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选 (略) 元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑， (略) 稳定可靠，售后服务优良。
|
|
*** ROYOLE01/21
|
阵列探针式测试机/阵列面板测试机/阵列电性测量机/面板测试机/电性测量机
|
2台/2台/2台/1台/1台
|
设备用途及基本要求： 阵列探针式测试机、阵列面板测试机设备主要用于自动识别test key位置，在对应test (略) 精准扎针，同时配合tester设备，完成对应讯号输入，测试出产品对应的功能性异常，阵列电性测量机设备主要用于搭配Probe扎针设备，完成每个pin针对应讯号输入， (略) 理，反馈出产品Vth, Mobility, Ion, Ioff, Rs, Vgs-Ids ,I-V&C-V dark/photo curve , LTB , BTS 等电性异常，以便找出制程缺陷并改善，面板测试机、电性测量机设备主要用于IGZO (Oxide) LCD/AMOLED。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选 (略) 元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑， (略) 稳定可靠，售后服务优良。
|
|
*** ROYOLE01/22
|
阵列电性缺陷测试机
|
2台
|
设备用途及基本要求： 本设备功能是搭配Probe扎针设备，完成每个pin针对应讯号输入， (略) 理，反馈出产品GOA驱动/Open&Short/Mura等电性缺陷，以便找出制程缺陷并改善。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选 (略) 元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑， (略) 稳定可靠，售后服务优良。
|
|
*** ROYOLE01/23
|
在线光致发光检查机
|
2台
|
设备用途及基本要求： 本设备主要用于检测蒸镀基板的PPA。要求该设备结构设计合理，采用先进成熟技术，保证系统具有良好的动态品质，在操作过程中操作者的视线要好。所选 (略) 元件精度高，可靠性好，响应速度快。设备使用、操作、维修方便，造型美观，结构紧凑， (略) 稳定可靠，售后服务优良。
|
|
|
3、投标人资格要求
|
|
投标人应具备的资格或业绩： (略) 、 (略) 文件且满足文件中要求，并参加投标竞争的法人或其他组织。凡是来自中华人民共和国或是与中华人民共和国有正常贸易往来的国家或地区的法人或其他组织均可投标。
|
|
是否接受联合体投标：不接受
|
|
未领购招标文件是否可以参加投标：不可以
|
|
4、招标文件的获取
|
|
招标文件领购开始时间： ***
|
|
招标文件领购结束时间： ***
|
|
获取招标文件方式：现场领购
|
|
招标文件领购地点： (略) , (略) 市 (略) 区 (略) 路1 (略) A座新中电大厦21 (略)
|
|
招标文件售价：详见招标文件
|
|
其他说明： (略) (略) http:/ *** 进行招标文件的购买和下载。
|
|
5、投标文件的递交
|
|
投标截止时间（开标时间）： *** 10:00
|
|
投标文件送达地点： (略) (略) 市 (略) 区 (略) 路1 (略) A座新中电大厦19层
|
|
开标地点： (略) (略) 市 (略) 区 (略) 路1 (略) A座新中电大厦19层
|
|
6、 (略) 网上完成注册。 (略) 网公示。
|
|
7、联系方式
|
|
招标人： (略) (略)
|
|
地址： (略) 市 (略) 区科技园科苑路15号科兴科学园A4-1901
|
|
联系人：孙宇
|
|
联系方式 ： ***
|
|
招标代理机构： (略)
|
|
地址： (略) 市 (略) 区 (略) 路1 (略) A座新中电大厦
|
|
联系人：高攀、赵天舒
|
|
联系方式 ：+86-10- *** ; ***
|
|
1.Bidding Conditions
|
|
Overview：Royole Flexible Display Quasi-G6 Plant
|
|
Source of Funds：OK
|
|
Description of The Prepared Bidding Conditions：OK
|
|
2.Bidding Content：
|
|
Bidding No： *** ROYOLE01/19-23
|
|
Project Name：Royole Flexible Display Quasi-G6 Plant
|
|
Place of Implementation：Shenzhen, Guangdong, China
|
|
List of Products：
|
|
NO.
|
Product Name
|
Quantity
|
Main Technical Data
|
|
*** ROYOLE01/19
|
FIB
|
1set
|
Application and general requirement: The system is mainly used for observing Specific point in cross-section of the small sample and judging Defect layer. This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service.
|
|
*** ROYOLE01/20
|
SEM
|
1set
|
Application and general requirement: The system is mainly used for sample observation .This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service.
|
|
*** ROYOLE01/21
|
Array Test-Probe/ Array TEG-Probe/ INT TEG- Probe /Array TEG-Tester
|
8sets
|
Application and general requirement: This equipment is mainly used for automatic recognition of test key position precision needle in the corresponding test pad, at the same time with the tester equipment, complete the corresponding signal input, to test the functional abnormality of the corresponding products. This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service.
|
|
*** ROYOLE01/22
|
Array Tester
|
2sets
|
Application and general requirement: The main function of this equipment is collocation Probe needle device, each pin for signal input. After software processing, feedback the product GOA drive /Open&Short/Mura electrical defects, in order to find out the process defects and im *** system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service.
|
|
*** ROYOLE01/23
|
Inline PL
|
2sets
|
Application and general requirement: The system is mainly used for removing PR pattern on the substrates. This system is required to be reasonable in design, with advanced technology to ensure the system an excellent kinetic performance. The action elements selected for the control system shall be of high accuracy, good reliability and rapid response. The machine shall be convenient for use, operation and maintenance, be artistic in configuration, compact in structure, stable in performance and satisfactory in after-sale service.
|
|
|
3.Qualification Requirements For Bidder
|
|
Qualifications or Performance：Qualifications or Performance:Bidders are legal persons or other organizations who participate in bidding. This Invitation for Bids is open to all suppliers from within the People's Republic of China (hereinafter abb. as "PRC") and all countries/areas which have regular traderelations with PRC. Bidders must pay for the bidding documents andregister for the record, otherwise the bidder has no qualification to attend the bid.
|
|
Joint Bids：NOT Available
|
|
Bid without the bidding documents：NOT Available
|
|
4.Acquisition of Bidding Documents
|
|
Beginning of Selling Bidding Documents： ***
|
|
Ending of Selling Bidding Documents： ***
|
|
To Obtain：On-site Purchase
|
|
Place：Bidding Documents Selling Counter, Level 21, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China
|
|
Price of Bidding Documents: See Bidding Documents
|
|
Additional Instructions：The bidder needs to register before the tender on www.c *** . And the evaluation results will be released on www.c ***
|
|
5.Bid Submission
|
|
Deadline for Submitting Bids/Time of Bid Opening (Beijing Time)： *** 10:00
|
|
Place of Bid：China National Electronics Import & Export Corporation, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China
|
|
Place of Bid Opening：China National Electronics Import & Export Corporation, Level 19, New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China
|
|
6.The bidder needs to register before the tender on www.c *** . And the evaluation results will be released on
www.c *** .
|
|
7.Contact Details
|
|
Purchasers：Shenzhen Royole Display Technologies Co. Ltd.
|
|
Add.：A4-19F01, Kexing Science Park, No.15 Keyuan Rd, Nanshan District, Shenzhen, China ***
|
|
Contact：Ms Sun
|
|
Tel： ***
|
|
Bidding Agency：CEIEC
|
|
Add.：New CEIEC Building, No. 17 Fuxing Road, Haidian District, Beijing, P. R. China
|
|
Contact：Mr. Gao Pan or Ms. Zhao Tianshu
|
|
Tel ：86-10- *** ; ***
|
PDF格式
Excel格式
Word格式
京公网安备 11010802042560号