德国促进贷款楚雄医药高等专科学校建设教学实验基地项目教学设备采购补遗通知2

Item No. 序号

Name of Goods 设备名称

招标文件条款号及内容
Item No.and Content of Tender Document

澄清要求
Clarification Request

Reasons for revise
修改理由

Answer
回复

Technical Question技术问题

*

General biological microscopic imaging system

普通生物显微成像系统

Item No. * “General biological microscopic imaging system”, Item No. * “Pathological graphic analysis system”, Item No. * -1 “Fully automatic tissue slide scanning device”, After investigation and verification from many aspects, it is found that only onemanufacturercan fully meet the asterisk clause in the technical parameters of the above items.

品目号 * “普通生物显微成像系统”、品目号 * “病理图文分析系统”品目号 * -1“全自动组织玻片扫描设备”，经从多方面调研和求证，发现能够完全满足上述品目技术参数中星号条款的仅有 * 家制造商 * 家满足。 Therefore, our company believesthat such behavior seriously violates Article * of the Measures for the Implementation of International Bidding and Bidding for Mechanical and Electrical Products (Order No. 1, * of the Ministry of Commerce of China) : "The technical and commercial provisions of the bidding documents shall be clear, explicit and unambiguous, and no discriminatory clauses or unreasonable requirements shall be set to exclude potential bidders. In principle, the contents of the bidding documents should meet the requirements that more than three potential bidders can participate in the competition."

故我司认为： (略) 为严重违反了《 (略) 投标实施办法》( (略) * 年1号令)第 * 十 * 条：“招标文件的技术、商务等条款应当清晰、明确、无歧义，不得设立歧视性条款或不合理的要求 排斥潜在投标人。招标文件编制内容原则上应当满足3个以上潜在投标人能够参与竞争。”

Therefore, the Tenderee is requested to modify the tender document so that Item No. * “General biological microscopic imaging system”, Item No. * “Pathological graphic analysis system”, Item No. * -1 “Fully automatic tissue slide scanning device” meet the requirements of the three manufacturers.

故请招标人修改标书以使品目号 * “普通生物显微成像系统”、品目号 * “病理图文分析系统”、品目号 * -1“全自动组织玻片扫描设备”满足 * 个制造商。

Technical specifications ofthis item is modified, details please refer to the appendix1 .

本品目技术参数已修改，详见附件1。

*

Pathological graphic analysis system

病理图文分析系统

Technical specifications ofthis item is modified, details please refer to the appendix 2.

本品目技术参数已修改，详见附件2。

* -1

Fully automatic tissue slide scanning device 全自动组织玻片扫描设备

Technical specifications ofthis item is modified, details please refer to the appendix 3.

本品目技术参数已修改，详见附件3。

5-1

Solid phase extraction device
固相萃取装置

I. Item 5-1, Equipment Name: Solid phase extraction device.
Requirements in technical parameters of bidding: “*3.2 Support large-volume water sample automatic loading, loading volume of * mL or more.”, “*3.3 Automatically realize automatic addition of no less than 8 channels of solvent, and automatically collect waste liquid after the solvent passes through the column.”
We‘ve found that only theproductofonemanufacturer can meet the above technical requirements, but itrefuses to issue manufacturer authorization and other relevant documents to our company, which means our company will not be able to participate in the bids of this project as a qualified prospective bidder.
* 、第5-1项，设备名称：固相萃取装置。招标技术参数中要求：“*3.2 支持大体积水样自动上样，上样体积 * mL 以上”，“*3.3 自动实现不小于 8 通道溶剂自动添加，溶剂过柱后实现废液自动收集”。
能够满足前述技术要求的仅 * 家制造商，且该 (略) 出具制造商授权等相关文件，因此我公司无法作为合格潜在投标人正常参与本项目的投标。

Main brands from within and outside of China can meet the above technical requirements. The bidder can contact other manufacturers that meet the requirements of the Tender Document. This clause will not be modified.

国内外主流品牌都可以达到以上技术要求， (略) 文件要求的制造商。此条不做修改。

8

Atomic absorption

原子吸收

II. Item 8,Equipment Name: Atomic absorption. Requirements in technical parameters of bidding:“ *3.1.1 A high-focus short-arc xenon lamp is used to test * different heavy metal elements in any line.“,“ *3.2.2 Resolution: ≤ 0. * nm“,“ *3.3. * Analysis speed: ≥6 elements per minute“.

We’ve found that without alternatives, only the productofonemanufacturercan meet the above technical requirements. Besides, it issues the letter of authorization to us only after singing the pre-bid cooperation agreement with them, in which requires that bidders must use it’s products to respond bidding requirements for items: 8. Atomic absorption/ 9. Gel imaging system/ * . Hydride generator/ * . Real-time fluorescence quantitativePCR instrument for Thermal Circulation system/ * -1. Intelligent Microwave Chemistry Work Platform/ * -2. Intelligent Microwave Chemistry Work Platform/ * . Ultraviolet visible spectrophotometer/ * . Total organic carbon (TOC) analyzer, * .ICP-MS/ * -6. Microwave digestion instrument.

The agreement also stipulates that no missing items are allowed, If there is any omission, * , * RMB is required to be paid to them as the penalty. Under such circumstances, we will not be able to provide the manufacturer authorization of the equipment in the bids for this project, if we do not agree to sign the pre-bid cooperation agreement with them.

At the same time, we think this is unfair competition as these unreasonable requirements of this manufacturerare intended to exclude our company from using other manufacturers’ products that can meet items 9, * , * , * -1, * -2, * , * , * and * -6 to respond to the bidding documents.

* 、第8项，设备名称：原子吸收。招标技术参数中要求：“*3.1.1 * 个高聚焦短弧氙灯得到任 * 谱线测试 * 种不同重金属元素”， “*3.2.2 分辨率:≤ 0. * nm”， “*3.3. * 分析速度：每分钟≥6 个元素”。

能够满足前述技术要求的仅有 * 家制造商的产品。且该制造商在本项目投标过程中要求我方与其签署标前 (略) 协议书方才同意给予出具制造商授权书， (略) 要求的8.原子吸收、9.凝胶成像系统、 * .氢化物发生装置、 * .热循环系统实时荧光定量PCR仪、 * -1.智能微波化学工作平台、 * -2.智能微波化学工作平台、 * .紫外可见光光度计、 * .总有机碳（TOC）分析仪、 * .ICP-MS、 * -6.微波消解仪，并不得有漏项，如有漏项要求向其赔偿 * 万人民币的违约金。在此种情况下，我公司如若不同意签署该标前 (略) 协议书，则我公司在本项目的投标中无法提供该设备的制造商授权。

同时该制造商的不合理要求， (略) 使用其他能够满足第9、 * 、 * 、 * -1、 * -2、 * 、 * 、 * 、 * - (略) 文件，有失公平竞争。

The parameters are adjusted as follows: 参数调整如下：

* 3.1.1 a high focusing short arc xenon lamp obtains any spectral line to test * different heavy metal elements. If other technologies are adopted, a set of lamp capable of measuring the following * elements shall be provided

（Al、Sb、As、Ba、Be、Bi、B 、Cd、Ca、Cs、Ce、Cr、Co、Cu、Dy、Er、Eu、Gd、Ga、Ge、Au、Hf、Ho、In、Ir、Fe、La、Pb、Li、Lu、Mg、Mn、Hg、Mo、Nd、Ni、Nb、Os、Pd、Pt、K、Pr、Re、Rh、Rb、Ru、Sm、Sc、Se、Si、Ag、Na、Sr、Ta、Te、Tb、Tl、Th、Tm、Sn、Ti、W、U、V、Yb、Y、Zr）

*3.1.1 * 个高聚焦短弧氙灯得到任 * 谱线测试 * 种不同重金属元素，如采用其他技术，需提供能够测量如下 * 种元素（Al、Sb、As、Ba、Be、Bi、B 、Cd、Ca、Cs、Ce、Cr、Co、Cu、Dy、Er、Eu、Gd、Ga、Ge、Au、Hf、Ho、In、Ir、Fe、La、Pb、Li、Lu、Mg、Mn、Hg、Mo、Nd、Ni、Nb、Os、Pd、Pt、K、Pr、Re、Rh、Rb、Ru、Sm、Sc、Se、Si、Ag、Na、Sr、Ta、Te、Tb、Tl、Th、Tm、Sn、Ti、W、U、V、Yb、Y、Zr）的灯1套

3.2.2 Resolution: ≤ 0. * nm.

3.2.2 分辨率:≤ 0. * nm.

*3.3. * analysis speed: ≥ * elements every two minutes

*3.3. * 分析速度：每两分钟≥ * 个元素

4.2.6 One original short arc xenon lamp (spare). If other technologies are adopted, it is necessary to provide the following * elements (al, Sb, as, Ba, be, Bi, B, CD, CA, CS, CE, Cr, Co, Cu, Dy, er, EU, Gd, GA, Ge, Au, HF, Ho, in, IR, Fe, La, Pb, Li, Lu, Mg, Mn, Hg, Mo, Nd, Ni, Nb, OS, PD, Pt, K, PR, re, Rh, Rb, Ru, SM, SC, Se, Si 1 set of lamps for Ag, Na, Sr, Ta, Te, TB, Tl, th, TM, Sn, Ti, W, u, V, Yb, y, Zr (standby)

4.2.6原装短弧氙灯（备用）1支，如采用其他技术，需提供能够测量如下 * 种元素（Al、Sb、As、Ba、Be、Bi、B 、Cd、Ca、Cs、Ce、Cr、Co、Cu、Dy、Er、Eu、Gd、Ga、Ge、Au、Hf、Ho、In、Ir、Fe、La、Pb、Li、Lu、Mg、Mn、Hg、Mo、Nd、Ni、Nb、Os、Pd、Pt、K、Pr、Re、Rh、Rb、Ru、Sm、Sc、Se、Si、Ag、Na、Sr、Ta、Te、Tb、Tl、Th、Tm、Sn、Ti、W、U、V、Yb、Y、Zr）的灯1套（备用）

* - *

Cloud desktop software

云桌面软件

III. Item * - * ,Equipment Name: Cloud desktop software.

Requirements in technical parameters of bidding:” Support three display protocols, such as RDP, PCoIP, and Blast, to flexibly meet different application needs of customers and achieve optimal performance and user experience.”;” Server virtualization platform provides support for WinNT, Windows * and Apple Mac OS operating systems.”;”The virtualization platform provides a unified firewall configuration policy to ensure the security of the virtualization platform and virtual machines.”. Among them, PCoIP display protocol, supporting Apple Mac OS operating system and providing unified firewall configuration strategy are all unique technologies of onemanufacturer."s cloud desktop products.

Although the above three technical requirements are non-asterisk terms, our bids will be rejected under such requirements, if we do not use thismanufacturer’s products to respond.

Our company thinks that the above requirements do not comply with the requirements of “ 3 suppliers or manufacturers” and violate the same provisions ofissued by Ministry of Commerce.

* 、第 * - * 项，设备名称：云桌面软件。招标技术参数中要求：“同时支持RDP、PCoIP、Blast等 * 种显示协议,灵活满足客户不同应用需求，获得最佳的性能和用户体验”；“服务器虚拟化平台提供对包括WinNT,Windows * 以及Apple Mac OS操作系统的支持”；“虚拟化平台提供统 * 的防火墙配置策略，保障虚拟化平台及虚拟机的安全性”。其中PcoIP显示协议、支持Apple Mac OS操作系统、提供统 * 的防火墙配置策略，均为某制造商的云桌面产品的独有技术。

虽然前述 * 条技术要求均为非星号条款， (略) 文件，我公司的投标将被否决。

我公司认为前述要求不符合KFW采购导满足 * 个供应商或制造商要求， (略) 《 (略) 投标实施办法》 * 个供应商或制造商原则的情况。

PCoIP display protocol is not unique to onemanufacturer. PCoIP is a protocol developed by teradic. It is not only the only protocol used by thismanufacturer‘scloud desktop, but also supported by AWS cloud desktop. Appole Mac OS operating system also supports appole Mac OS in KVM (cloud desktop open source system) in server virtualization. Now many cloud desktop manufacturers are using open source systems, such as Ruijie, Lenovo, blue pigeon, cloud wing, etc. The unified firewall configuration strategy is also not unique to this manufacturer. Sangfor, Huawei, Citrix and other cloud desktops are clearly described in their own publicity. Many manufacturers from within and outside of China can meet the technical parameters.

This clause will not be modified.

Pcoip显示协议并非某制造商的独有协议，pcoip属于Teradic开发的协议，不仅仅是该制造商云桌面独 * 使用的协议，aws的云桌面也支持此协议。Appole Mac OS操作系统在服务器虚拟化中kvm（云桌面开源系统）中同样支持Appole Mac OS，现在 (略) 家都是在用开源系统，比如锐捷、联想、蓝鸽、云之翼等。统 * 的防火墙配置策略同样也并非该制造商独有的，深信服、华为、citrix等云桌面都在自己的宣传中有明确描述。国内外很多制造商均可满足技术参数。

此条不做修改。

*

Paraffin slicer

石蜡切片机

IV.Item * , Equipment Name: Paraffin slicer.

Requirements in technical parameters of bidding:” * .*The knife holder has a hand guard to cover the full length of the blade to ensure safety. Effectively protect users when slicing and replacing wax blocks. At the same time, the knife holder has the function of lateral movement, which effectively makes full use of the full length of the blade.”.

It is found that onlyonemanufacturer’s product can meet this function, which means, no other manufacturers’ products can fully meet the requirements of this parameters.

Moreover, it refused to issue manufacturer authorization and other relevant documents to us, so we will not be able to participate in the bids of this project as a qualified prospective bidder.

* 、第 * 项，设备名称：石蜡切片机。招标技术参数中要求：“ * .*刀架带有护手，覆盖刀锋全长，确保安全。在切片和更换蜡块时有效保护用户。同时刀架具备侧向移动功能，有效充分地利用刀片全长”。

据查，该产品仅 * 家制造商生产的产品满足该项功能， (略) 商的产品能够完全满足该条参数要求。

且该 (略) 出具制造商授权等相关文件，因此我公司无法作为合格潜在投标人正常参与本项目的投标。

This parameter is not exclusive to any manufacturer, and most domestic brands can meet the requirements. The bidder shall carefully check and seek the manufacturer according to the tender requirements.

This clause will not be modified.

该条参数并非某 * 制造商独家参数，且大多数国产品牌都能满足。 (略) 要求仔细核对、 (略) 商。

此条不做修改。

*

Microscope

显微镜

V. Item * , Equipment Name: Microscope.

Requirements in technical parameters of bidding:” * . *All glass components are free of lead, and special treatment on the surface of the microscope helps prevent disease transmission and results in a healthier laboratory environment. All products are tested by an independent safety laboratory and have cULus or UL or CE certification marks to prove their design safety. All products comply with the RoHs standard, ie all electrical components comply with the requirements for the use of hazardous substances.”

It is found that only onemanufacturer’s technologies can meet these requirements, which is a unique technology of this manufacturer.

Moreover, it refuses to issue manufacturer authorization and other relevant documents to us, so we will not be able to participate in the bids of the project as a qualified prospective bidder.

* 、第 * 项，设备名称：显微镜。招标技术参数中要求：“ * 、*所有玻璃组件中均不含铅，利用显微镜 (略) 理有助于防止疾病传播，从而形成更健康的实验室环境。所有产品都经过独立的安全实验室的测试，并有cULus或 UL 或 CE 认证标志以证明其设计安全，所有产品均符合RoHs标准，即所有电气组件符合危险物质使用的规定”。

据查，该产品仅 * 家制造商的技术能够符合该条要求，且该技术为该制造商教学显微镜的独有技术。

且该 (略) 出具制造商授权等相关文件，因此我公司无法作为合格潜在投标人正常参与本项目的投标。

This parameter does not specify patent requirements, and most domestic brands can meet the safe use requirements such as non-toxic and harmless products and relevant certification. The bidder shall carefully check and seek the manufacturer according to the tender requirements.

This clause will not be modified.

该条参数并未指明专利要求，且大多数国产品牌都能满足产品无毒无害等安全使用要求及相关认证。 (略) 要求仔细核对、 (略) 商。

此条不做修改。

*

Multimedia training room

多媒体实训室

This item is cancelled and the budget is moved to item * . Item * - * Cloud terminal, * - * Cloud terminal accessories and * - * Computer desk and chair are added under item * . Technical specifications please refer to appendix 4.

取消本品目采购，预算移至品目 * ，品目 * 增加 * - * 云终端、 * - * 云终端配件和 * - * 电脑桌椅，技术参数详见附件4。

*

Human anatomical model人体解剖模型

2. Use highly simulated environmental protection materials,the pigment adopts non-toxic, harmless and pollution-free environmental protection paint; it has passed TUV non-toxic divergence certification and provided proof materials.

2、采用高仿真环保材料，颜料采用无毒，无害，无污染的环保油漆；通过TUV无毒发散性认证，并提供证明材料；

This clause is modified to:

2. High-simulation human anatomical model, made of PVC environmentally friendly materials, and the pigments are non-toxic, harmless, and non-polluting environmentally friendly paints; it has passed TUV non-toxic divergence certification and provides proof materials; the model with a fixed base.

本条修改为：

2、高仿真人体解剖模型，采用PVC环保材料制作，颜料采用无毒，无害，无污染的环保油漆；通过TUV无毒发散性认证，并提供证明材料；模型附带固定底座。

RelatedItem No.

相关品目号

Relateditems

相关品目

The symbols of “※”in tender document have the same meaning of symbol of “*”.

招标文件中的“※”符号与“*”符号含义相同。

Commercial Question商务问题

1

“The bidder should at least have experience in 2 educational and / or medical equipment contracts financed by Foreign Governmental Loans or International Finance Corporation Loans in the past five years (from Jan 1st, * until the final date of the bid submission deadline ), and each individual contract amount shall be no less than EUR * million or equivalent, shall be proved by one of the following two evidences: 1. copies of notification of awards and contracts; 2. copies of final acceptance certificates.”

“投标人近 * 年（ * 日至投标截止之日）至少有2个外国政府贷款或国际金融组织机构贷款教育和/或医疗类设备合同经验，单个合同金额不低于 * 万等值欧元，须提供以下两类证明之 * ：1、中标通知书和中标合同复印件；2、最终验收证明复印件“

The bidder suggests amending the requirements of the bidding document as “the bidder should at least have experience in 1 educational and / or medical equipment contracts financed by Foreign Governmental Loans or International Organization Loans in the past five years (from Jan 1st, * until the final date of the bid submission deadline ), and each individual contract amount shall be no less than EUR * million or equivalent, shall be proved by one of the following evidences: 1. copy of notification of awards and contracts; 2. copy of sales contract or purchase order; 3. copy of final acceptance certificate.”

(略) 文件要求修改为“投标人近 * 年（ * 日至投标截止之日）至少有1个外国政府贷款或国际组织机构贷款教育和/或医疗类设备供货合同经验，单个合同金额不低于 * 万等值欧元，须提供以下证明之 * ：1、中标通知书和中标合同复印件；2、销售合同或采购订单复印件；3、最终验收证明复印件。”

The stipulation is unreasonable and exclusive.

该规定具有不合理排他性。

The Purchaser has the right to set certain qualification and commercial criteria to ensure the smooth implementation of the project by the successful bidder. The Purchaser and the Tendering Agency consider that the setting of this clause does not violate Article * of the regulations for the implementation of the bidding law of the people"s Republic of China and article * of the measures for the implementation of international bidding for mechanical and electrical products, and conforms to the specific characteristics and actual needs of the project, and satisfies for more than 3 potential bidders to participate in the competition. Thus, this clause will not be amended.

招标人有权利设置 * 定的资格、商务条件要求以确保中标人具备顺利实施项目的能力，招标方认为本条款的设置未违反《 (略) 投标法实施条例》第 * 十 * 条和《 (略) 投标实施办法》第 * 十 * 条的规定，符合本项目的具体特点和实际需要，且满足3个以上潜在投标人能够参与竞争。本条款不做修改。

8

Section 2. Bid Data Sheet ITB * .1
第 * 章 投标资料表 ITB * .1

Modify to: 修改为：
The Bidders shall be requested to establish a Bid Security with an amount of Euro * , * . * or equivalent CNY, exchanging according to the benchmark price announced by the People"s Bank of China on the date * days prior to the deadline for bid submission *** * , * ).
投标人须提供 * , * . * 欧元或等值人民币的投标担保，按照投标截止前 * 天的当日（即 * 日） (略) 宣布的日 (略) 折算。

9

The room number for address of bid submission and bid opening is changed to: No.8 Bid Opening Hall.
投标文件递交地址和开标地址的房间号变更为：开标厅8。

*

The deadline for bid submission and bid opening is postponed to * : * am Nov * , * (Beijing Time).
投标截止和开标时间延期至 * 日上午 * : * （ (略) 时间）。

*

General biological microscopic imaging system

2

Bid parameters shall be equivalent or superior to the following requirements:

1. * Optical system: Infinity correction optical system, the objective lens parfocal distance is international standard ≤ * mm; or IC2S infinity chromatic contrast dual correction optical system, * mm international standard objective lens parfocal distance.

2. Have observation function such as bright field.

3. 5-bit objective lens converter.

4. Total magnification: * X- * X; or * X- * X.

5. Trinocular viewing tube.

6. Transmitted light illumination: LED lighting system.

7. * One-handed operation of the sample holder or slide in and out of samples quickly with one hand or a sample holder for two slides.

8. * Focusing and X-Y adjustment are fully symmetrical, achieving fatigue-free operation; or adopt motorized stage.

Or coaxial coarse fine tuning focal mechanism, coarse adjustment a circle of 4mm, fine tuning a circle of 0.4mm and the minimum 4μm scale, built-in anti-sliding mechanism without adjusting, does not use the fragile external elastic adjustment ring, can realize the principle of ergonomics.

Or ergonomic low stage.

9. Focus knob (thick/fine), the height of the focus knob is adjustable or the tension of the focus knob is adjustable or built-in anti-sliding mechanism without adjusting, does not use the fragile external elastic adjustment ring.

* . * Condenser: color mark with aperture mirror bar matching the objective lens magnification, convenient for condenser adjustment; Or electric condenser automatically switch magnification without adjusting condenser;Or general 7-hole condenser or non-swing condenser: NA≥0.9/1. * ,under the observation of 5X objective lens, no swing operation is required,with locking device after Kohler lighting adjustment.

* . * Super hard plated ceramic stage or ceramic surface coaxial stage or high anti-wear double-layer stage or motorized stage or high anti-wear rounded angle, groove free anodized metal stage, the stage can be adjusted by adjusting the left and right hands, and the X-Y moves without the exposed rack; or mechanically fixed stage, left and right hand can select (WxD): * mm x * mm, moving range (X x Y): * mm x * mm, with sample position calibration, XY movement of the stage can be locked without the exposed rack; or the tightness and height of the stage can be adjusted, double slide sample holder, left and right free adjustment.

* . The objective lens group:

Flat field achromatic objective lens 4x (NA=0. * )

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 1. * ),

Or Flat field achromatic objective lens 5x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥1. * , M *

* . Eyepiece: * X wide field eyepiece with field of view of * mm.

* . *With the same brand microscope camera with software: ≥ HD live image * p, * fps, JPEG image has maximum of * pixels, 5 megapixels, MP4 movie clips have maximum of * pixels, 2 megapixels, camera control via computer ( PC mode) or via remote control RC2 (HD mode), can be switched, directly capture JPG or MP4 to SD card, display images or play movie clips directly in HD display, don"t need PC, it can also display user-defined overlay on live map, USB2 connection, compatible with PC and laptop, support operating system: Win XP/Win 7/Mac OSX. image processing function: image acquisition, white balance, gain, auto calibration, the scale follows the magnification adjustment, labeling , arrow, annotation function, measuring single distance, point-to-point ranging, image conversion, colour – BW & BW – colour, floating menu, multi-language support, support for various formats of storage, image format size optional function.

Or With the same brand microscope camera with software: ≥HD live image * p, * fps, image has maximum of * pixels, 6.4 megapixels；sensor type 1/1.8 inch color CMOS；pixel size 2.4 μm × 2.4 μm；USB3.0 high-speed transmission, compatible with PC and laptop, support operating system: Win7/Win * ；image processing function: image acquisition, white balance, gain, auto calibration, the scale follows the magnification adjustment, labeling , arrow, annotation function, measuring single distance, point-to-point ranging, image conversion, multi-language support, support for various formats of storage, image format size optional function.

Or With the same brand microscope camera with software: color CMOS chip size≥1/2.1 inch, physical pixel ≥ 8.3 megapixel, ultra HD (4K), pixel size≤1. * μm × 1. * μm, shooting speed≥ * frame/s (resolution * ), 1- * x gain adjustable, power supply can be selected from the microscope body or a separate power supply, HDMI/USB3.0 Type C/ Ethernet/ Micro-D various data transmission interfaces, the camera can use Wi-Fi to connect and control the camera to take pictures, the camera comes with an OSD image acquisition system, can use HDMI to directly connect to the display for image acquisition, no additional computer is required; the camera has active noise reduction, active sharpening function and can be collected in HDR mode.

* . Image acquisition function:

* .1. The motor microscope can be completely set up and controlled, and the automatic experimental conditions can be saved and restored in one click. Can control camera shooting and ROI shooting, adjust exposure, gain, binning, gamma and other parameters.

* .2. One-click batching of all open images can automatically add the correct ruler. it can realize one-click batch conversion of LIF and JPG / TIFF/AVI/Quicktime formats for all open images. Even if the computer is powered off during the experiment, the unsaved pictures will automatically appear in the reopened software. It is also possible to automatically save pictures in the specified folder.

* .3. Image editing function: filter with sharpening, noise reduction, color, background, separation, shape, edge, etc. Including image cropping, changing image resolution, grayscale depth, multi-dimensional image cutting, overlay, combination and other functions. It is possible to perform operations such as addition, subtraction, deduct, intersection, Ratio, and shift between images and images.

* .4. Image measurement function: It can realize the length/area/perimeter/total light intensity/center point measurement of irregular ROI. Can calculate the maximum value, minimum value, average difference, standard deviation, total value, average value, and so on. Fluorescence intensity manual and automatic quantitative measurement: single-line, region, sequence and overall image stacking area light intensity measurement. on-line measurement of ratio measurement on real-time map. The length does not need to be calibrated, and the measurement unit (um) shows directly without calibration. Equipped with a proportional fluorescence calibration formula for measurement and analysis of dual-wavelength proportional fluorescence measurements. Topology processing: topology and filtering, and topology 3D display.

* .Configuration requirements:

* .1. Standard configuration 1 set

* .2. Computer, no less than i5 processor, 8G memory, 1G discrete graphics, 1T hard drive, * -inch display, * -bit operating system.

*

普通生物显微成像系统

2

投标参数需等同或优于如下参数：

*1、光学系统：无限远校正光学系统， 物镜齐焦距离为国际标准≤ * mm; 或IC2S无限远色差反差双重校正光学系统， * mm国际标准物镜齐焦距离。

2、 (略) 等观察功能

3、5位物镜转换器。

4、总放大倍数： * X- * X；或 * X- * X。

5、 * 目观察镜筒

6、透射光照明：LED照明系统。

*7、单手操作样夹或单手可快速滑入和滑出样品或放置两个玻片的样品夹。

*8、调焦与X-Y调节全对称，实现无疲劳操作；或采用电动载物台；

或同轴粗微调焦机构，粗调 * 圈4mm，微调 * 圈0.4mm及最小4μm的刻度，内置免调节防下滑机构，不采 (略) 松紧调节环，能实现人机工程学原理；

或人机工程学低位载物台 。

9、聚焦旋钮(粗/细)，调焦旋钮高度可调或调焦旋钮的张力可调节 或内置免调节防下滑机构，不采 (略) 松紧调节环。

* * 、聚光镜:带与物镜放大倍数相匹配的孔镜光栏彩色标记，方便聚光镜调节；或电动聚光镜自动切换放大倍率无需调整聚光镜；或通用7孔位聚光镜或非摆动式聚光镜：NA≥0.9/1. * ，在5x物镜观察下，无需摆动操作，带科勒照明调整后锁定装置。

* * 、超硬镀陶瓷载物台或陶瓷表面同轴载物台或高抗磨损性双层载物台或电动载物台或高抗磨损性圆角、无槽 (略) 理载物台。载物台调节左右手可以更换，X-Y移动无暴露齿条；或 机械固定载物台， 左右手可选(W × D): * mm × * mm · 移动范围 (X × Y): * mm × * mm， 具有样品位置刻度，载物台 XY 移动可锁定，无暴露齿条；或载物台手柄松紧度高度可调，双玻片样品夹持器，左右自由调节。

* 、配物镜组：

平场消色差物镜4x（NA=0. * ）

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥1. * ），

(略) 消色差物镜5×，数值孔径：NA≥0. * ，M * ；

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ;

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ;

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ；

平场消色差荧光物镜 * ×，数值孔径：NA≥1. * ，M * 。

* 、目镜： * X宽视野目镜，视野数为 * mm。

* * 、配同品牌显微镜照相机带软件: ≥高清活图 * p， * fps， JPEG 图像有最大 * 像素， * 像素， MP4 电影片段有最大 * 像素， 2 百万像素， 照相机控制经计算机 (PC 模式) 或经遥控器 RC2 (HD 模式)， 可切换， 直接采集 JPG 或 MP4 到 SD 卡， 显示图像或播放电影片段直接地在高清显示屏， 不需使用 * 台 PC， 也可以显示用户定义叠加图在活图上， USB2 连接， 与 PC和笔记本兼容， 支援操作系统: Win XP/Win 7/Mac OSX； (略) 理功能：图像采集，白平衡，增益，自动校准， 比例尺跟随倍率调节，标注，箭头，注解功能，测量单 * 距离， 点对点测距，图象转换， colour – BW & BW – colour，浮动菜单，多语言支持，支持各种格式的存储，图像格式大小可选功能。

或 配同品牌显微镜照相机带软件: ≥高清活图 * p， * fps， 图像有最大 * 像素， * 万像素；传感器类型 1/1.8英寸彩色CMOS；像素大小 2.4 μm × 2.4 μm；USB3.0高速传输连接， 与 PC和笔记本兼容， 支援操作系统: Win7/Win * ； (略) 理功能：图像采集，白平衡，增益，自动校准， 比例尺跟随倍率调节，标注，箭头，注解功能，测量单 * 距离， 点对点测距，图象转换， 多语言支持，支持各种格式的存储，图像格式大小可选功能。

或配同品牌显微镜照相机带软件:彩色CMOS芯片尺寸≥1/2.1英寸，物理像素≥ * 万，Ultra HD(4K)，像素点大小≤1. * μm x 1. * μm，拍摄速度≥ * 幅/秒（分辨率 * x * ），1- * x增益可调，可通过显微镜机身或单独电源供电两种方式可供选择，HDMI/USB3.0 TypeC/Ethernet/Micro-D多种数据传输接口，相机可利用Wi- (略) 连接控制相机拍照，相机自带OSD图像采集系统，可利用HDMI直接连 (略) 图像采集，无需额外配备电脑；相机带有主动降噪、主动锐化 (略) HDR模式采集。

* 、 (略) 采集功能：

* .1、能完全设置和控制电动显微镜，能 * 键化自动实验条件保存和恢复还原。能控制摄像头拍摄及ROI拍摄，调整曝光， 增益， binning， 伽玛值等参数。

* .2、 (略) 有打 (略) * 键批量化自动添加正确标尺； (略) 有打开的图片实现 * 键批量化LIF与JPG / TIFF/AVI/Quicktime等格式的输出转换。实验采图过程中即使电脑断电，未保存的图片依然会自动出现在再打开的软件中。也能自动保存图片在指定文件夹。

* .3、图像编辑功能：具有锐化、降噪、色彩、去背景、分离、形态、边缘等滤镜。包括图像剪切、改变图像分辨率、灰阶深度，多维度图像切割、叠加、组合等功能。 (略) 图像与图像之间的相加、相减、扣除、交集、Ratio（比例）、移位等运算。

* .4、图像测量功能:能实现不规则ROI的长度/面积/周长/总光强度/中心点测量。能统计最大值、最小值、平均差、标准差、总值、平均值等。荧光强度手动和自动定量测量： (略) 单线、区域、序列以及整个图象堆叠区域光强度测量；在实时图上在线测量比率测量。长度无需校准，测量单位（um）直接显示无需校准。配有比例荧光校准公式，可实现测量分析双波长比例荧光测定。 (略) 理：扑拓过滤， 扑拓3D显示。

* 、配置要求：

* .1 标准配置 * 套

* .2电脑 * 台，配置 (略) 理器，8G内存，1G独立显卡，1T硬盘， * 英寸显示器， * 位操作系统。

*

Pathological graphic analysis system

2

Bid parameters shall be equivalent or superior to the following requirements:

I. Tissue graphic report system technology (software) parameters:

1. The project is a key function that is specifically required from the perspective of pathology management and practicality.

2. Regular Reporting Workstation Software

3. You can view the basic information of the case, the clinical diagnosis information, the photos and descriptions of the general specimens, and the detailed records of the materials.

4. Automatically prompt the historical pathological results of the case and the other specimens examined at the same time.

5. Use optical camera or digital camera with standard interface to view, capture and save the mirror image in real time, and perform various processing, measurement and labeling functions on the image.

6. Record the diagnostic report items such as pathological findings, pathological diagnosis, and immunohistochemistry results.

7. Report common words, report format customization functions.

8. Adapt to the third level doctor responsibility system of pathology report, provide directional reprint, multilevel reprint function, first diagnosis opinion and duplicate opinion stored separately for reference. The superior doctor can evaluate the result of the first diagnosis opinion, and can count the number of duplicate films and the accuracy rate of duplicate film.

9. Slice quality evaluation and slice quality statistics are available.

* . Provide internationally advanced “structured report” custom report templates for seven types of small specimens and thirteen large specimens of oncology diseases.

* . Internal medical requirements can be issued, including re-cutting, deep-cutting, replenishing, immunohistochemistry, etc. The internal medical orders issued should be prompted at the corresponding work site to view the corresponding implementation of the internal medical order (medical orders status) and results. The immunohistochemical results can be evaluated by staining and quickly introduced into the pathological diagnosis results.

* . The application for intra-disciplinary consultation can be issued. The system will automatically join the “inside consultation” list and prompt. Other doctors can quickly locate these consultation cases after logging in to the system, and can add, modify, and delete their own consultations within the department.

* . The case can be followed up and the system will automatically add the “required follow-up case” list and prompt, you can enter and save the follow-up results, and you can continue the follow-up or end the follow-up.

* . The collection of interested cases can be managed, the system will automatically add to the "My Favorites" list and prompt, the doctor can export his own list of favorite cases.

* . Important report trace background record and traceability query function.

* . Rich and practical reporting tools, including pathological examination registration, pathology report receipt, material collection worksheet, slicing worksheet, dyeing worksheet (by marker), staining worksheet (by pathology), pathological examination, Outpatient receipts, borrowed documents, etc.

* . You can combine queries or statistical cases according to multiple conditions, you can perform fuzzy queries, or you can perform precise queries. The results of the query or statistics can be exported to the EXCEL form file.

* . Frozen reportquality control management function, query the release time of the frozen report and summarize the statistics.

* . Powerful statistical tools, including report release statistics, missing pathology statistics, charge statistics, pathologist workload statistics, department workload monthly report, monthly workload report, technical doctor monthly report, special inspection doctor month Report, slice quality monthly report, diagnostic compliance rate monthly report, important report trace query, etc.

* . By customizing the PACS system interface, the pathology system directly accesses the contents of the PACS system and sends the relevant pathological examination results to the PACS system.

II. Digital microscopic technical parameters:

1. * Optical system: Infinity correction optical system, the objective lens parfocal distance is international standard ≤ * mm; or IC2S infinity chromatic contrast dual correction optical system, * mm international standard objective lens parfocal distance.

2. Have observation function such as bright field.

3. 5-bit objective lens converter.

4. Total magnification: * X- * X; or * X- * X.

5. Trinocular viewing tube.

6. Transmitted light illumination: LED lighting system.

7. * One-handed operation of the sample holder or slide in and out of samples quickly with one hand or a sample holder for two slides.

8. * Focusing and X-Y adjustment are fully symmetrical, achieving fatigue-free operation; or adopt motorized stage.

Or coaxial coarse fine tuning focal mechanism, coarse adjustment a circle of 4mm, fine tuning a circle of 0.4mm and the minimum 4μm scale, built-in anti-sliding mechanism without adjusting, does not use the fragile external elastic adjustment ring, can realize the principle of ergonomics.

Or ergonomic low stage.

9. Focus knob (thick/fine), the height of the focus knob is adjustable or the tension of the focus knob is adjustable or built-in anti-sliding mechanism without adjusting, does not use the fragile external elastic adjustment ring.

* . * Condenser: color mark with aperture mirror bar matching the objective lens magnification, convenient for condenser adjustment; Or electric condenser automatically switch magnification without adjusting condenser;Or general 7-hole condenser or non-swing condenser: NA≥0.9/1. * ,under the observation of 5X objective lens, no swing operation is required,with locking device after Kohler lighting adjustment.

* . * Super hard plated ceramic stage or ceramic surface coaxial stage or high anti-wear double-layer stage or motorized stage or high anti-wear rounded angle, groove free anodized metal stage, the stage can be adjusted by adjusting the left and right hands, and the X-Y moves without the exposed rack; or mechanically fixed stage, left and right hand can select (WxD): * mm x * mm, moving range (X x Y): * mm x * mm, with sample position calibration, XY movement of the stage can be locked without the exposed rack; or the tightness and height of the stage can be adjusted, double slide sample holder, left and right free adjustment.

* . The objective lens group:

Flat field achromatic objective lens 4x (NA=0. * )

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 0. * ),

Flat field achromatic objective lens * x (NA ≥ 1. * ),

Or Flat field achromatic objective lens 5x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥0. * , M *

Flat field achromatic fluorescent objective lens * x, numerical aperture: NA≥1. * , M *

* . Eyepiece: * X wide field eyepiece with field of view of * mm.

* . *With the same brand microscope camera with software: ≥ HD live image * p, * fps, JPEG image has maximum of * pixels, 5 megapixels, MP4 movie clips have maximum of * pixels, 2 megapixels, camera control via computer ( PC mode) or via remote control RC2 (HD mode), can be switched, directly capture JPG or MP4 to SD card, display images or play movie clips directly in HD display, don"t need PC, it can also display user-defined overlay on live map, USB2 connection, compatible with PC and laptop, support operating system: Win XP/Win 7/Mac OSX. image processing function: image acquisition, white balance, gain, auto calibration, the scale follows the magnification adjustment, labeling , arrow, annotation function, measuring single distance, point-to-point ranging, image conversion, colour – BW & BW – colour, floating menu, multi-language support, support for various formats of storage, image format size optional function.

Or With the same brand microscope camera with software: ≥HD live image * p, * fps, image has maximum of * pixels, 6.4 megapixels；sensor type 1/1.8 inch color CMOS；pixel size 2.4 μm × 2.4 μm；USB3.0 high-speed transmission, compatible with PC and laptop, support operating system: Win7/Win * ；image processing function: image acquisition, white balance, gain, auto calibration, the scale follows the magnification adjustment, labeling , arrow, annotation function, measuring single distance, point-to-point ranging, image conversion, multi-language support, support for various formats of storage, image format size optional function.

Or With the same brand microscope camera with software: color CMOS chip size≥1/2.1 inch, physical pixel ≥ 8.3 megapixel, ultra HD (4K), pixel size≤1. * μm × 1. * μm, shooting speed≥ * frame/s (resolution * ), 1- * x gain adjustable, power supply can be selected from the microscope body or a separate power supply, HDMI/USB3.0 Type C/ Ethernet/ Micro-D various data transmission interfaces, the camera can use Wi-Fi to connect and control the camera to take pictures, the camera comes with an OSD image acquisition system, can use HDMI to directly connect to the display for image acquisition, no additional computer is required; the camera has active noise reduction, active sharpening function and can be collected in HDR mode.

* . Image acquisition function:

* .1. The motor microscope can be completely set up and controlled, and the automatic experimental conditions can be saved and restored in one click. Can control camera shooting and ROI shooting, adjust exposure, gain, binning, gamma and other parameters.

* .2. One-click batching of all open images can automatically add the correct ruler. it can realize one-click batch conversion of LIF and JPG / TIFF/AVI/Quicktime formats for all open images. Even if the computer is powered off during the experiment, the unsaved pictures will automatically appear in the reopened software. It is also possible to automatically save pictures in the specified folder.

* .3. Image editing function: filter with sharpening, noise reduction, color, background, separation, shape, edge, etc. Including image cropping, changing image resolution, grayscale depth, multi-dimensional image cutting, overlay, combination and other functions. It is possible to perform operations such as addition, subtraction, deduct, intersection, Ratio, and shift between images and images.

* .4. Image measurement function: It can realize the length/area/perimeter/total light intensity/center point measurement of irregular ROI. Can calculate the maximum value, minimum value, average difference, standard deviation, total value, average value, and so on. Fluorescence intensity manual and automatic quantitative measurement: single-line, region, sequence and overall image stacking area light intensity measurement. on-line measurement of ratio measurement on real-time map. The length does not need to be calibrated, and the measurement unit (um) shows directly without calibration. Equipped with a proportional fluorescence calibration formula for measurement and analysis of dual-wavelength proportional fluorescence measurements. Topology processing: topology and filtering, and topology 3D display.

III. Configuration requirements

Computer 1 set :dedicated, configuration no less than i5 processor, no less than 8G memory, discrete graphics, no less than 1T hard drive, no less than * -inch display, * -bit operating system.

Color laser printer 1 set (dedicated)

Pathological graphic analysis software 1 set (dedicated)

Image capture card 1 piece (dedicated)

Foot switch 1 piece (dedicated)

Video cable 1 piece (dedicated)

HD camera 1 piece (dedicated)

Optical interface 1 piece (dedicated)

Digital microscope 1 set

*

病理图文分析系统

2

投标参数需等同或优于如下参数：

* 、组织图文报告系统技术（软件）参数：

1.项目为从病理科管理和实用角度特别要求的重点功能。

2.常 (略) 软件

3.可查看病例的基本信息、临床诊断信息、大体标本的照片和描述、取材的明细记录等内容。

4.自动提示该病例的历史病理结果和同次送检的其他标本检查情况。

5.使用光学摄像头或带标准接口的数码摄像头，可实时浏览、采集和保存镜下图像， (略) (略) 理、测量、标注功能。

6. (略) 见、病理诊断、免疫组化结果等诊断报告项目。

7.报告常用词、报告格式自定义功能。

8.适应病理报告 * 级医生负责制，提供定向复片、多级复片功能，初诊意见和复片意见单独保存备查。上级医生可对 (略) 结果评价，可以统计复片数和复片准确率。

9. (略) 切片质量评价和切片质量统计。

* .针对 * 类小标本和十 * 类大标本肿瘤疾病，提供国际先进的“结构化报告”自定义报告模版。

* . (略) 医嘱要求，包括重切、深切、补取、免疫组化等， (略) 医嘱在 (略) 点上有相应提示， (略) 医 (略) 情况（医嘱状态）和结果，可对免疫 (略) 染色评价，并快速导入到病理诊断结果。

* .可发出科内会诊申请，系统会自动加入“科内会诊” (略) 提示，其他医生登录系统后可以快速定位这些会诊病例，可增加、修改、删除自己的科内会诊意见。

* . (略) 随访标记，系统会自动加入“需随访病例” (略) 提示，可录入并保存随访结果，并可继续随访或结束随访。

* .可对感兴 (略) 收藏管理，系统会自动加入到“我的收藏夹” (略) 提示，医生可以导出自己的收藏夹病例列表。

* .重要报告痕迹后台记录和溯源查询功能。

* .丰富实用的报表工具，包括病理检查登记本、病理报告签收本、取材工作单、切片工作单、染色工作表（按标记物）、染色工作表（按病理号）、病理检查底单、门诊回执、借片凭证等。

* .可根据多个条件来组合查询或统计病例、 (略) 模糊查询， (略) 精确查询。查询或统计出的结果可以导出EXCEL表格文件。

* .冰冻报告质控管理功能，查询冰冻报告发 (略) 汇总统计。

* .功能强大的统计工具，包括报告发放统计、漏编病理号统计、收费统计、病理医生工作量统计、科室工作量月报表、送检工作量月报表、技术医嘱月报表、特检医嘱月报表、切片质量月报表、诊断符合率月报表、重要报告痕迹查询等。

* .通过定制PACS系统接口，实现病理系统直接调阅PACS系统内容并把相关病理检查结果发送给PACS系统。

* 、数码显微技术参数：

*1、光学系统：无限远校正光学系统， 物镜齐焦距离为国际标准≤ * mm; 或IC2S无限远色差反差双重校正光学系统， * mm国际标准物镜齐焦距离。

2、 (略) 等观察功能。

3、5位物镜转换器。

4、总放大倍数： * X- * X；或 * X- * X。

5、 * 目观察镜筒

6、透射光照明：LED照明系统。

*7、单手操作样夹或单手可快速滑入和滑出样品或放置两个玻片的样品夹。

*8、调焦与X-Y调节全对称，实现无疲劳操作；或采用电动载物台或同轴粗微调焦机构，粗调 * 圈4mm，微调 * 圈0.4mm及最小4μm的刻度，内置免调节防下滑机构，不采 (略) 松紧调节环，能实现人机工程学原理或 人机工程学低位载物台 。

9、聚焦旋钮(粗/细)，调焦旋钮高度可调或调焦旋钮的张力可调节 或内置免调节防下滑机构，不采 (略) 松紧调节环。

* * 、聚光镜：带与物镜放大倍数相匹配的孔镜光栏彩色标记，方便聚光镜调节；或电动聚光镜自动切换放大倍率无需调整聚光镜；或通用7孔位聚光镜或非摆动式聚光镜：NA≥0.9/1. * ，在5x物镜观察下，无需摆动操作，带科勒照明调整后锁定装置。

* * 、超硬镀陶瓷载物台或陶瓷表面同轴载物台或高抗磨损性双层载物台或电动载物台或高抗磨损性圆角、无槽 (略) 理载物台。载物台调节左右手可以更换，X-Y移动无暴露齿条或机械固定载物台， 左右手可选(W × D)： * mm × * mm · 移动范围 (X × Y)： * mm × * mm， 具有样品位置刻度，载物台 XY 移动可锁定，无暴露齿条或载物台手柄松紧度高度可调，双玻片样品夹持器，左右自由调节。

* 、配物镜组：

平场消色差物镜4x（NA=0. * ）

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥0. * ），

平场消色差物镜 * x（NA≥1. * ），

(略) 消色差物镜5×，数值孔径：NA≥0. * ，M * ；

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ;

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ;

平场消色差荧光物镜 * ×，数值孔径：NA≥0. * ，M * ；

平场消色差荧光物镜 * ×，数值孔径：NA≥1. * ，M * 。

* 、目镜： * X宽视野目镜，视野数为 * mm。

* * 、配同品牌显微镜照相机带软件： 高清活图≥ * p， * fps， JPEG 图像有最大 * 像素， ≥ * 万像素， MP4 电影片段有最大 * 像素， ≥2 百万像素， 照相机控制经计算机 (PC 模式) 或经遥控器 RC2 (HD 模式)， 可切换， 直接采集 JPG 或 MP4 到 SD 卡， 显示图像或播放电影片段直接地在高清显示屏， 不需使用 * 台 PC， 也可以显示用户定义叠加图在活图上， USB2 连接， 与 PC和笔记本兼容， 支援操作系统： Win XP/Win 7/Mac OSX； (略) 理功能：图像采集，白平衡，增益，自动校准， 比例尺跟随倍率调节，标注，箭头，注解功能，测量单 * 距离， 点对点测距，图象转换， colour – BW & BW – colour，浮动菜单，多语言支持，支持各种格式的存储，图像格式大小可选功能。

或 配同品牌显微镜照相机带软件： ≥高清活图 * p， * fps， 图像有最大 * 像素， * 万像素；传感器类型 1/1.8英寸彩色CMOS；像素大小 2.4 μm × 2.4 μm；USB3.0高速传输连接， 与 PC和笔记本兼容， 支援操作系统： Win7/Win * ； (略) 理功能：图像采集，白平衡，增益，自动校准， 比例尺跟随倍率调节，标注，箭头，注解功能，测量单 * 距离， 点对点测距，图象转换， 多语言支持，支持各种格式的存储，图像格式大小可选功能。

或配同品牌显微镜照相机带软件：彩色CMOS芯片尺寸≥1/2.1英寸，物理像素≥ * 万，Ultra HD(4K)，像素点大小≤1. * μm x 1. * μm，拍摄速度≥ * 幅/秒（分辨率 * x * ），1- * x增益可调，可通过显微镜机身或单独电源供电两种方式可供选择，HDMI/USB3.0 TypeC/Ethernet/Micro-D多种数据传输接口，相机可利用Wi- (略) 连接控制相机拍照，相机自带OSD图像采集系统，可利用HDMI直接连 (略) 图像采集，无需额外配备电脑；相机带有主动降噪、主动锐化 (略) HDR模式采集。

* 、 (略) 采集功能：

* .1、能完全设置和控制电动显微镜，能 * 键化自动实验条件保存和恢复还原。能控制摄像头拍摄及ROI拍摄，调整曝光， 增益， binning， 伽玛值等参数。

* .2、 (略) 有打 (略) * 键批量化自动添加正确标尺； (略) 有打开的图片实现 * 键批量化LIF与JPG / TIFF/AVI/Quicktime等格式的输出转换。实验采图过程中即使电脑断电，未保存的图片依然会自动出现在再打开的软件中。也能自动保存图片在指定文件夹。

* .3、图像编辑功能：具有锐化、降噪、色彩、去背景、分离、形态、边缘等滤镜。包括图像剪切、改变图像分辨率、灰阶深度，多维度图像切割、叠加、组合等功能。 (略) 图像与图像之间的相加、相减、扣除、交集、Ratio（比例）、移位等运算。

* .4、图像测量功能：能实现不规则ROI的长度/面积/周长/总光强度/中心点测量。能统计最大值、最小值、平均差、标准差、总值、平均值等。荧光强度手动和自动定量测量： (略) 单线、区域、序列以及整个图象堆叠区域光强度测量；在实时图上在线测量比率测量。长度无需校准，测量单位（um）直接显示无需校准。配有比例荧光校准公式，可实现测量分析双波长比例荧光测定。 (略) 理：扑拓过滤， 扑拓3D显示。

* 、整机配置表

　　计算机 1 台 专用 配置 (略) 理器，不低于8G内存，独立显卡，不低于1T硬盘，不低于 * 英寸显示器， * 位操作系统。

　　彩色激光打印机 1 台 专用

　　病理图文分析软件 1 套 专用

　　图像采集卡 1 块 专用

　　脚踏开关 1 只 专用

　　视频线 1 根 专用

　　高清摄像头 1 台

　　光学接口 1 个 专用

　　数码显微镜 1 台

* -1

Fully automatic tissue slide scanning device

1

Fully automatic tissue slide scanning device parameters

1.Scientific high-end automatic upright fluorescence microscope system, equipped with standard 1. * X/0. * , 5X/0. * , * X/0.3. * X/0.8, * X/0. * ;or 2×/0. * 、4×/0. * 、 * ×/0.4、 * ×/0.8、 * ×/0. * ；

2. Focus mode: Fully automatic focusing, automatically find scanning samples. can also be set manually.

3. Scan the application object:

a) bright field slides such as HE stained slides, immunohistochemical stained slides, frozen section stained slides, special stained slides, immunocytochemical staining pictures.

b) immunofluorescent slides---cells and tissues.

c) tissue chip scanning (TMA).

4. Loading quantity: ≥ 6 pieces, realize unattended batch scanning.

5. At least 6 fluorescent channels.

*6. Scientific research high-precision scanning, dual camera system

1) monochrome high-resolution camera, scanning fluorescence image,effective number of images: ≥ * ; or 3. * μm×3. * μmpixel size， * million pixels；

2) Color high resolution camera, scanning bright field image, effective number of images: ≥ * ; or 3. * μm×3. * μmpixel size，5 million pixels；

7. Scanning area: automatic identification & manual setting, which can be set according to different needs of users. Both the bright field and the fluorescence can automatically identify the tissue area.

8. * Scanning mode: Brightfield scanning and fluorescence scanning can be performed. manual scanning and fully automatic scanning.

9. Scanning resolution: ≤0. * μm/pixel ( * X objective lens), ≤0. * μm/pixel ( * X objective lens) ≤0. * μm/pixe ( * X objective lens), collecting scientific research high-precision high-quality images, realizing slicing Information scanning.

* . Barcode recognition: Automatically scan the slide logo for barcode scanning and manage the scanned slide. It can be docked with management software.

* . Slide range: thickness 0.9-1.2mm or wider, slide size: * × * mm

* . Multi-layer focusing function, custom layer number and layer spacing; or Z-axies focusing function, custom layer number and layer spacing.

* . *Motorized stage with encoder or Nanoscale motorized stage, step accuracy less than 0.1 μm, +/- 0.3 μm accuracy.

* . Workstation configuration: workstation level computer , Xeon E5- * processor, * GB * MHz DDR4 RDIMM ECC memory, 2 x 1TB 3.5inch Serial ATA (7, * Rpm) operating system dedicated hard drive. 2 x 4TB 3.5inch Serial ATA (5. * Rpm) data dedicated hard drive, Windows 7 Ultimate * bit operating system, * " high resolution ( * × * ) LCD screen. Image processor: * CUDA processor core, * MHz base frequency, GDDR5 memory interface, * -bit memory bandwidth, * memory bandwidth (GB/sec).

* . The data memory is no less than 6x6TB hard disk and has a total storage space of * TB for storing image files.

* . Fluorescence scanning module, high-quality narrow-pass fluorescent filter to eliminate non-specific fluorescent signals.

* . Fluorescent light source with a lifetime of more than * h.

* . Three filter blocks are standard: ET filter block DAPI, ET filter block Green, ET filter block Orange; or Three filter blocks are standard:filter blockDAPI，filter blockFITC，filter blockCY3；

* . With bright field scanning, fluorescence scanning, FISH scanning and analysis, immunofluorescence analysis, cardiovascular analysis system, wireless remote consultation system and other functions.

* . The software technology part includes image scanning. image browsing. software analysis function: cytoplasm, nucleus, cell membrane and other analysis modules.

* -1

全自动组织玻片扫描设备

1

全自动组织玻片扫描设备参数

1、科研级高端全自动正置荧光显微镜系统，标准配备1. * ×/0. * 、5×/0. * 、 * ×/0.3、 * ×/0.8、 * ×/0. * ；或2×/0. * 、4×/0. * 、 * ×/0.4、 * ×/0.8、 * ×/0. * ；

2、聚焦方式：全自动对焦，自动寻找扫描样品；也可以手动设置；

3、扫描应用对象：

a)明场玻片如HE染色玻片、免疫组织化学染色玻片、冰冻切片染色玻片、特殊染色玻片、免疫细胞化学染色图片；

b)免疫荧光玻片---细胞及组织；

c)组织芯片扫描（TMA）。

4、装载数量：≥6片，实现无人值守批量扫描；

5、至少配备6个荧光通道；

*6、科研级高精度扫描，双相机系统

1）单色高分辨率相机，扫描荧光图像，有效像数：≥ * ；或3. * μm×3. * μm像素尺寸， * 万像素；

2）彩色高分辨率相机， (略) 图像，有效像数：≥ * ；或3. * μm×3. * μm像素尺寸， * 万像素；

7、扫描区域：自动识别＆人工设定，可根据用户不同需求设定。明场和荧光都可以自动识别组织区域；

*8、扫描方式： (略) 扫描与荧光扫描；手动扫描和全自动扫描；

9、扫描分辨率：≤0. * μm/pixel( * ×物镜)，≤0. * μm/pixel( * ×物镜) ≤0. * μm/pixe( * ×物镜)，采集科研级高精度高质量图像，实现切片全信息扫描；

* 、条码识别：自动对 (略) 条码扫描，对 (略) 管理。可与管理软件对接；

* 、玻片范围： 厚度0.9-1.2mm或更广，玻片尺寸： * * * mm；

* 、多层聚焦功能，自定义层数及层距；或Z轴自动聚焦，自定义层数及层距；

* * 、带编码器电动载物台或纳米级电动载物台，步进精度低于0.1 μm，+/- 0.3 μm的精度；

* 、 (略) 配置： (略) 级别计算机，Xeon E5- (略) 理器、 * GB * MHz DDR4 RDIMM ECC内存，2 x 1TB 3.5inch Serial ATA (7， * Rpm) 操作系统专用硬盘；2 x 4TB 3.5inch Serial ATA (5. * Rpm) 数据专用硬盘，windows 7旗舰版 * bit 操作系统、 * "高分辨率（ * ）液晶显示屏。 (略) 理器： * CUDA 处理器核心， * MHz基础频率 ，GDDR5显存接口， * -bit显存位宽， * 显存带宽 (GB/sec)；

* 、数据存储器不低于6x6TB硬盘，总存放空间达 * TB，用于存放图像文件；

* 、荧光扫描模块，高质量窄通荧光滤块，消除非特异荧光信号；

* 、荧光光源，寿命大于 * h；

* 、标配3种滤块：ET滤光块DAPI，ET滤光块Green，ET滤光块Orange；或标配3种滤块：滤光块DAPI，滤光块FITC，滤光块CY3；

* 、 (略) 扫描，荧光扫描，FISH扫描以及分析，免疫荧光分析，心血管分析系统，无线远程会诊系统等功能；

* 、 (略) 分包括图像扫描；图像浏览；软件分析功能：细胞质、细胞核、细胞膜等分析模块。

Item NO.

Equipment Name

Specifications and requirements

Q’ty

Unit

Authorization

* - *

Cloud terminal

Hardware parameters. CPU model: A9 1.6GHz or higher, memory: ≥1GB, hard disk capacity: ≥4GB (onboard), interface: ≥1 * M electrical port, interface type: 1*HDMI, USB interface: ≥6*USB2.0 .

*

set

C

* - *

Cloud terminal accessories

LCD Monitor. Size: ≥ * .5 inches, panel type: IPS, resolution: ≥ * .

Mouse and keyboard kit. Transmission method: cable; standard optical mouse, mouse resolution: ≥ * dpi, USB interface; standard keyboard, USB interface.

*

set

C

* - *

Computer desk and chair

Table: * mm high-density board base material, high-quality fireproof board finish, ergonomic design, can be flipped or screen can be raised and lowered. Specifications: * x * mm; including keyboard frame and main frame. Chairs (2 per set): wooden, ergonomically designed.

*

set

C

序号

设备名称

规格及要求

数量

单位

授权类别

* - *

云终端

硬件参数。CPU型号：A9 1.6GHz或更高，内存：≥1GB，硬盘容量：≥4GB（板载），接口：≥1百兆电口，接口类型：1*HDMI，USB接口：≥6*USB2.0。

*

套

C

* - *

云终端配件

液晶显示器。尺寸：≥ * .5英寸，面板类型：IPS，分辨率：≥ * 。

键鼠套件。传输方式：线缆；标准光电鼠标，鼠标分辨率：≥ * dpi，USB接口；标准键盘，USB接口。

*

套

C

* - *

电脑桌椅

桌子：采用 * mm (略) 度板基材，优质防火板饰面，符合人体工程学设计，可翻转或屏风可升降规格： * x * mm；含键盘架，主机架。椅子(每套2个）：木质，符合人体工程学设计。

*

套

C